Browse Categories
Combustion Thermal/Actuators

Herculine 2000 Series Actuator

Herculine 2000 Series Actuator
Item #: 2000-200-150-126-015-00-000000-0-0-00

Product Info

Honeywell’s HercuLine® 2000 series actuators are low torque, precision electric actuators incorporating all of the easy-to-use, high quality, and reliable features of the traditional HercuLine® actuators. Ensuring processes operate at maximum efficiency, with minimal downtime, and lowest lifetime cost requires precision and high reliability Herculine® actuators. They are industrial rated and engineered for very precise positioning of dampers and valves. They perform especially well in extremely demanding environments requiring continuous duty, high reliability, and low maintenance.

Features

  • Motor – no burn out motor can be stalled up to 100 hours without damage to the actuator.
  • Duty Cycle – Continuous duty cycle
  • Any position mounting – the actuator may be mounted in any orientation without degrading performance.
  • Power Requirements – Low power consumption 120/240 Vac, 50/60 Hz, single phase < 0.6/0.3 Amp.
  • Enclosure – Rugged, Die cast aluminum NEMA 4X industrial grade enclosure.
  • Low Maintenance – Simple-proven design means high reliability/low maintenance.
  • Limit Switches – Two end-of-travel electric limit switches are supplied as standard equipment with all Herculine? 2000 series actuators.
  • Warranty – Exceptional warranty
  • Certification – CSA (pending), UL, CE

Honeywell 2000-200-150-126-015-00-000000-0-0-00 | Actuator | 2000 | 200 lb-in | 150° | Single | 100 – 130 VAC/60 Hz | 0.625 +/-0.005 Inch | Round | Die Cast Aluminum

Lead Time: 32.00 DAYS

Item Specifications

  • UL Type 4/IP66, CSA
  • No
  • No Switches
  • No Communications Option Board or Protocol
  • 1 Inch to 2.8 Inch
  • Type 4 (NEMA 4), IP66 (Standard)
  • No
  • Light Gray Powder Coat Epoxy
  • Precision-Machined Die Cast Aluminum
  • 3 Wire Drive Up/Down
  • No Display
  • English
  • Factory Set at 90° or 150° (+/-5°)
  • -40 °F to 185 °F
  • Dual 1000 Ohm (1000 ohms over 150 degrees)
  • 0.625 +/-0.005 Inch
  • Round
  • Single
  • 0 to 99%
  • No Relays
  • Counter Clockwise Shaft Rotation On Increasing Signal
  • 0 to 100%
  • 18/30 sec
  • 15/25 sec
  • -40 °F to 200 °F
  • 200 lb-in
  • 150°
  • 100 - 130 VAC/60 Hz
$2,153.00 /EA
NOT IN STOCK
QTY:

Add to Quote

Have Questions?

Ask our experts:
(800) 333-7519