Honeywell Herculine 2000 Series Actuator
Item #:
2001-400-090-126-200-20-111001-1-0-00
Product Info
Honeywell’s HercuLine® 2000 series actuators are low torque, precision electric actuators incorporating all of the easy-to-use, high quality, and reliable features of the traditional HercuLine® actuators. Ensuring processes operate at maximum efficiency, with minimal downtime, and lowest lifetime cost requires precision and high reliability Herculine® actuators. They are industrial rated and engineered for very precise positioning of dampers and valves. They perform especially well in extremely demanding environments requiring continuous duty, high reliability, and low maintenance.
Features
- Motor – no burn out motor can be stalled up to 100 hours without damage to the actuator.
- Duty Cycle – Continuous duty cycle
- Any position mounting – the actuator may be mounted in any orientation without degrading performance.
- Power Requirements – Low power consumption 120/240 Vac, 50/60 Hz, single phase < 0.6/0.3 Amp.
- Enclosure – Rugged, Die cast aluminum NEMA 4X industrial grade enclosure.
- Low Maintenance – Simple-proven design means high reliability/low maintenance.
- Limit Switches – Two end-of-travel electric limit switches are supplied as standard equipment with all Herculine? 2000 series actuators.
- Warranty – Exceptional warranty
- Certification – CSA (pending), UL, CE
Honeywell 2001-400-090-126-200-20-111001-1-0-00 | Actuator | 2001 Series | 90° Travel | 400 lb-in Torque | Single Phase | 100 – 130 VAC/60 Hz Voltage Rating
Lead Time: 18.00 DAYS
Item Specifications
-
UL Type 4/IP66, CSA
-
Yes with "Out of Auto Contact"
-
2 Auxilliary Switches
-
Modbus RTU RS485
-
1 Inch to 2.8 Inch
-
Type 4 (NEMA 4), IP66 (Standard)
-
Yes
-
Light Gray Powder Coat Epoxy
-
Precision-Machined Die Cast Aluminum
-
0/4-20 mA, 0/1-5 VDC, 0-10 VDC
-
Integrally Mounted Local Display/Keypad Interface
-
Factory Set at 90° or 150° (+/-5°)
-
-40 °F to 170 °F
-
0.625 +/-0.005 Inch
-
Single
-
0 to 99%
-
No Relays
-
Clockwise Shaft Rotation On Increasing Signal
-
0 to 100%
-
36/60 sec
-
30/50 sec
-
-40 °F to 200 °F
-
400 lb-in
-
90°
-
100 - 130 VAC/60 Hz